UFS 10/100
10/100 UTP TO FX SWITCH
UFS 10/100
FEATURES :
TECHNICAL DESCRIPTION :
The UFS 10/100 auto-negotiates on its twisted pair port for
the system with the highest data rate acceptable to both link partners.
No standard exists for fibre auto-negotiating. The fibre port conforms to the
Fx standard. A switch is provided to set either half or full duplex operation.
SPECIFICATION :
Twisted Pair Port :-
Conforms to 10 Base T or 100 Tx specification.
Auto-negotiates to best data rate.
Switch:- DTE / DCE
Indicator:- Speed
Fibre Optic Port :- Conforms to 100 Fx standard.
Note:- The 100 Fx standard uses a wave length of 1300nm
which is outside the visable spectrum.
Connector:- Standard SC (Option available for Single mode)
Indicators:- Link
Data In
Switch:- Full duplex/Half
duplex switch (detected on power up).
Mechanical :- Size:-
120 x 130 x 21 mm
Weight :- 500 gms
Power :- +12v
(+10/-25%) @ 350mA by 1.3 mm connector (inner positive).
Mains adaptor supplied with unit.
LED Indicator
Enviroment :- Operating Temperature:- 0oC
to 45oC
Storage:- -20oC
to 70oC
Humidity:- 10% to 90% non condensing.
. . Order Code
.
Description .
UFS 10/100 . . . . . . . . .Standard multi mode Convertor including mains
adaptor.
UFS 10/100-SM . . . . .Single mode Convertor including mains adaptor.
Add SC or ST on the end of the order code for the Connector type you require.
VolAmp Ltd
Unit 3, Riverside Business Park, Dogflud Way, Farnham, Surrey, GU9 7SS
Tel 01252 724055 Fax 01252 733425 E-mail: info@volamp.com
www.volamp.com