• Compact
• Economical
• Rugged
• Three Tap option

TECHNICAL DESCRIPTION :

The VES 8055 is an economical compact transceiver which provides an inexpensive mean of connecting to an Ethernet local Area network.
Three versions are available, using the same body but with different taps.

AMP TAP – This is used to make attachment to Thick Ethernet (10BASE5) A pin pierces the outer shething of the cable to make contact with the central conductor whilst two other taps make contact with the cable screen. T his tap can be installed or removed whilst the network is up and running without causing disruption

N CONNECTOR – This is used to make attachment to Thin Ethernet (10BASE5). The Transceievr is fitted with two Female N type connectors at each side which mate with male connectors on the cables, this provides a highly reliasble in – line connection.

BNC CONNECTOR - This is used to make attachment to Thin Ethernet (10BASE2) The AUI connection must be made to a PC controller card, rep[eater or bridge to conform to the IEEE 802.3 specification.

SPECIFICATION :
The VolAmp BNC Transceiver is designed to the following standards:
IEEE 802.3 for Thinnet interface.

Mechnical Case - Totally enclosed metal construction
Electrical - 10.4V to 16V at 200Ma. peak Drawn from AUI connectors
Environment - Operating temperature 0oC to 50Oc
Storage Temperature - –20oC to 70Oc
Humidity - 10% to 90% non condensing
Indicators - SQU
. . . . . .; . . ON for PC
. . . . . . . . .OFF for a repeater
Dimensions - 83mm x 64mm x 28mm
Weight - 253 g
MTBF - 350,000hrs

. . Order Code . Description .
VES 8055 . . . . . . . . . . . . . . . . . . . . .Transceiver – NO TAP
VES 8055-1 . . . . . . . . . . . . . . . . . . . Transceiver – AMP TAP
VES 8055-2 . . . . . . . . . . . . . . . . . . . Transceiver – N CONNECTOR
VES 8055-3 . . . . . . . . . . . . . . . . . . . Transceiver – BNC CONNECTOR