VIDEO FIBRE OPTIC RECEIVER

Features

  • May be free standing or mounted in power frame rack.
  • Powered from 5 volts.
  • Automatic rise time control.
  • Will convert fibre input to any common video copper output.
  • Variants available for different fibre connections.
  • Suitable for pathological inputs.
  • Re clock to minimize jitter

  The video fibre optic receiver is a high speed digital fibre optic receiver which, when used in conjunction with our video fibre optic transmitter, will allow the extension of SDI / HDI links up to 4 Km. To achieve maximum distance the transmitter will launch into single mode fibre at a wavelength of 1310nm (the standard for HDI specifies an SC connector and single mode fibre). The receiver will recieve1310nm and 1550nm wavelengths.
  Designed to support data rates of 143, 177, 270, 360, 540, 1483.5 Mbps and DVB-AST at 270Mbps, it has auto mode for data rate selection. Re-clocking capability may be bypassed.
  The fibre optic input wavelength is between 1200 - 1600nm. Copper output is by a standard 75 Ohm BNC connector.
  Front panel status indicators are duplicated on the rear of the module, providing module status independent of unit orientation within rack.

Specification

Mechanical dimensions 43 x 72 x 35 (including connector)
  BNC connector protrudes 20mm from unit
Power 5v dc @ 2W, 1.3mm coaxial centre positive
   
Unit will connect to power source in power frame. +5v
Power adaptor available for free standing use.
Temperature Operating 0 - 55o C
  Storage -40 to 85o C
 
Return loss better than -15dB to 1500 Mhz

BNC output is 75 Ohms standard HD and SD serial digital signal.

Fibre Sensitivity -23 to -2 dbm (SC)

 

Indicators      
  Power
PWR
 
Lock Detect
On if signal is locked to data.
 
Input present
On if fibre input is present
 
HD / SD
HD
 On if input is HD

 

Distance achievable with suitable Transmitter.
Date rate
Wavelength
Mode
Distance
1.485
1310
S
4km
For further combinations please contact us.

For Power Frame info click HERE

Order Code

VHD-FRX-(CC)

(CC) Connector type SC (standard)
= SC
    ST
= ST
    LC
= LC

 

VolAmp Ltd
Unit 3, Riverside Business Park, Dogflud Way, Farnham, Surrey, GU9 7SS
Tel 01252 724055 Fax 01252 733425 E-mail: info@volamp.com
www.volamp.com